AMC 2026 catalogue

Pumps

Submersible Sump Pumps

Need a price? Log in or register at Grainger.ca 1628

PUMPS

Automatic Hazardous Location Submersible Pump

▪Vertical switches with brass floats for automatic operation ▪Max. temp.: 104°F Cast-Iron pump is engineered for hazardous locations. Eliminates the need for control panels for intrinsically safe installations. FM Approved for applications such as oil-change facilities, airport hangers, and other areas containing explosive fumes or gases.

HP Switch Type On Point Off Point

Discharge

NPT Height Diameter

Base Material

Impeller Material

GPM of Water @ 5 ft. of Head

GPM of Water @ 15

ft. of Head Max Head

Max. Diameter

Solids Amps Cord Length

Item

No. 2 Vertical 19 3⁄4 in 10 in 2 in 24 15⁄16 13 5⁄16" Cast Iron Cast Iron 214 184 75 ft 2 in 17.10 20 ft. WWG4HEX9

ZOELLER

Elevator Sump Pumps with Oil Sensors

▪Stainless steel drive shafts ▪Buna N seals Cast-Iron Pumps are designed for applications that may allow oil to contaminate groundwater: Units shut down the pump system and indicate an alarm when oil or other hydrocarbons have entered the sump. Sounds a 120dB alarm to warn of high water and oil levels. Auxiliary contacts allow connection to building automation or SCADA systems.

WWG5CZF7 WWG2WMN1

HP

Switch

Type On Point Off Point

Discharge

NPT Height

Base Material

Impeller Material

GPM of Water @ 5 ft. of Head

GPM of Water @ 15 ft. of Head

Max Head

Max. Diameter

Solids

Max. Liquid

Temp. Amps

Cord Length Brand

Item

No. 1⁄2 Sensor 6 1⁄4 in Variable 1 1⁄2 in 13" Cast Iron Polypropylene 65 48 37 ft 1⁄2 in 140°F 8.00 10 ft. Liberty WWG2WMN1

3⁄10 Piggyback Float 10 1⁄8 in 16 1⁄16 in 1 1⁄2 in 10 1⁄16" Cast Iron Cast Iron 43 19 19 ft 1⁄2 in 130°F 9.70 15 ft. Zoeller WWG5CZF7

LIBERTY, ZOELLER

High-Head Filtered Effluent Pumps

▪120V ▪Max. temp.: 104°F Feature permanent split capacitor (PSC) motors with stainless steel shafts and hardware, long-life mechanical seals, and ball bearings. Design helps prevent problems with lockup, abrasives, and running dry. For use in wastewater treatment, liquid transfer, circulation, dewatering, and flood control in commercial and industrial systems.

WWG4NY26

Pump HP Height Diameter

Base Material

Pump Body

Material

Impeller Material

Shaft Seal

Material Amps

Cord Length

Discharge

NPT

Max. Diameter

Solids

GPM of Water @ 50 ft. of Head

GPM of Water @ 100 ft. of Head

Max Head

Item

No.

1⁄2 22 1⁄2" 4" Composite Stainless Steel Composite Nitrile Rubber 11.00 10 ft. 1 1⁄4 in F 1⁄16 in 14.5 11.5 230 ft WWG4NY25 22 1⁄2" 4" Composite Stainless Steel Composite Stainless Steel 9.50 10 ft. 1 1⁄4 in F 1⁄16 in 27 17.5 145 ft WWG4NY26

DAYTON

Dewatering and Trash Pumps

▪Max. liquid temp.: 104°F ▪1-phase

* AL = aluminum, DI = ductile iron, HC = high chrome, SiC = silicon carbide, UR = urethane rubber.

Pump

HP Height Diameter

Base Material

Pump

Body Material

Impeller Material

Shaft Seal

Material Voltage Amps

Cord Length

Discharge

NPT

Max. Diameter

Solids

GPM of Water @ 5 ft. of Head

GPM of

Water @ 10 ft. of Head

GPM of

Water @ 20 ft. of Head

GPM of

Water @ 30 ft. of Head

GPM of

Water @ 40 ft. of Head

Item

No.

1 17 1⁄2" 13 1⁄2" PVC Die Cast

AL UR SiC 120 VAC 9.60 32 ft. 3 in 1⁄4 in 60 60 55 46 35 WWG38H474

TSURUMI